Amp Power Supply

Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power


Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power
Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power

Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power    Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power

FEATURES of the FILAMENT TRANSFORMER/ POWER SUPPLY. This is a power supply which will provide current to filaments and hot wires at high voltage potential. The supplied current is regulated by the input control voltage which can be a 0-10 volts output from a PLC or other control source, or a variable potentiometer can be connected to terminals using the 10 volts output supplied. The output is isolated up to 30 kilovolts insulation with great tolerance for arcing pulses on that voltage from other possible sources.

Output power; 0 - 6 amps maximum into 1.0 to 1.5 ohms. Universal input power; 120 to 240 volts AC, single phase, 50/60 Hz, fused, no switches or taps used. Solid-state high efficiency low-loss design. Control of output current by means of 0 10 volts DC analog input.

Analog output provided to indicate actual output current for monitoring devices, display meter, gauge or PLC analog input. Easy connection of simple potentiometer for manual control if desired. Dry contact closure indicate power supply fault. This may be used to directly interface with optional PLC or alarm circuits. No oil insulation or oil-filled tanks are used.

Plug-in power cable for 120 volts service. Plug-in screw terminals provided for easy installation and service. Touch-safe enclosure with base plate provided for mounting in control enclosure. Mounting plate 11 7/8" (302mm) x 8 5/8" (219mm). Size; Body 12" (305mm) x 7 5/8" (194mm) x 5 (127mm). Allow the following additional clearances at installation: HV Connectors cable allowance 5" (127mm); ventilation on top 2" (51mm) over ventilation port; Terminal end bend space 2 1/2 (66mm). Weight; 16lbs (7.26 Kg). Designed to be surface- mounted on a back-panel inside a control enclosure, flanges supplied built-in. The following are provided with each unit; One plug with screw terminals for control socket, two high-current high voltage wires with plugs for output side and line cord with 120 volts plug for input power. The item "Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power" is in sale since Friday, December 13, 2013. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies". The seller is "pjhoyles" and is located in Jacksonville, Florida. This item can be shipped worldwide.

  1. Country of Manufacture: United States
  2. Ouput Voltage: 6 amps into 1 ohm
  3. Model: FPSA
  4. MPN: FPSA-1506A
  5. Nominal Input Voltage Rating (AC): 120 - 240
  6. Nominal Current Rating: 6 amps AC
  7. Brand: Hoyles Electronics


Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power    Filament Transformer, 6 amps at 30 Kilovolts (Kv) Isolation 120-240 volts power