600W Adapter Transformer Switch AC 110V / 220V to DC 12V 50amp Switch Converter. This switching power supply works with AC 110V / 220V and converts to DC 12V. Built-in fuse for a voltage-regulated individual output that can be set with an integrated potentiometer.
With short circuit, overload, overvoltage, protective function to protect your device. Equipped with a cooling fan with temperature control: It is operated automatically when the converter becomes hot with little noise. Linear power supplies have efficiencies in the range of 40% -60%, while switching power supplies fall in the range of 70% -90%. A highly efficient and reliable closed power supply with two outputs and a high operating temperature of - 20 + 60 ° C and cooling by free air convection.
Uses a switching regulator to convert AC power to low voltage DC power, and it's much more efficient than a linear power supply. Switching power supplies are also typically smaller than linear power supplies and use less raw material.
The cost of the power supply reduced more. Overload protection, over voltage protection, short circuit protection, which protects your load well. NOTE: By default, it is 220V.
Before using, select the input voltage of 110V / 220V according to your local voltage to avoid damage. DC Voltage: 12 V Rated Current: 50A Rated Power: 600W Ripple and Noise (maximum): 100 mV Adjustable Voltage Range: ± 10% Voltage Tolerance: +/- 2.0% Line Regulation: +/- 0.5% Charge Regulation: +/- 0.5% Holding time:?20mS (230V input, Io = 100%) Setup Time:? 1S (230V input, Io = 100%). Overload: 105 to 150% in hiccup mode, automatic recovery Overvoltage: 115-150% interrupt output, automatic recovery. Size: 215mm (L) x 115mm (W) x 50mm (H) Material: Metal, electronic parts Operating Temperature: -45 80/20% 90% RH Ambient Temperature: -50 85? L: Live Wire (input) N: Zero Wire (input) E: Earth Wire + V: Positive pole (output) - V: Negative electrode (output). Please select 110V / 220V input voltage according to your local voltage before use to avoid damage. The switch is located on the right side of the item. Pay attention to the positives and negatives. When using motor, fan and other inductive loads, please note the maximum starting current settings of the load. This parameter must not be greater than the maximum current.
Failure to do so may damage the power supply. 1 x Power Supply Adapter Switch Transformer. Please allow 1-3cm measuring deviation due to manual measurement.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. We stand behind our products.Your receive the wrong item. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls.
Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy.
We do not work on holidays in China. If you have any problem of the goods, please. Before you leave to neutral feedback. We promise we will try our best to deal with your problem. We appreciate your patience and support.Thank you for choosing us and have a great day! This item is in the category "Business, Office & Industrial\Electrical Equipment & Supplies\Power Supplies\Switching Mode Power Supplies". The seller is "alfaviewcam0510" and is located in this country: CN.