Alfatronix Ad Ic-f5062 (10 Amp) Switch Mode Power Supply

  

This model is suitable for ICOM IC-F5062, IC-F6062 and IC-A120E series of radios, however we can also supply a specific model PSU to suit specific types of mobile radios. Lead time on special models will be a week (depending on Alfatronix's stock availability). The AD Series Desktop Power Supplies include a battery back up output as standard. This can be connected to maintain charge in a lead acid battery to supply power in the event of a mains failure.

As a neat alternative to a loose battery, Alfatronix also supply a battery back up box, P/N AD BBB. This is designed to fit underneath the desktop supply and radio assembly and includes a 7Ah lead acid gel battery, presenting all three components as one tidy desktop assembly. Input Voltage Range: Auto-select, 85-135V AC and 170-265V AC, 50Hz/60Hz.

Output Voltage and Current: 13.6 V DC. Worst case limits are +/- 4%, 108W (9A). Power Conversion Efficiency: Typically 83%.

Isolation Between Input and Case/Output: 1.5kV AC/3.0kV AC rms. Isolation Casework to Ground: Connected directly to mains input ground. Normal Operating Temperature: 25°C to +30°C / +30°C to +70°C de-rate linearly to 0A. Storage Temperature: -25°C to +100°C. Max Case Temperature: 70°C at full load with 25°C ambient.

Operating Humidity: 95% max, non-condensing. Casework: Anodized aluminium, glass-filled polycarbonate.

Connections: Input - IEC-320 C14 socket, C13 terminated cordset. Output - 6.3mm push-on blade terminals. Ground - 6.3mm push-on blade terminals, adjacent to output (additional external ground if required).

Output: Indicator Green LED mains output on, Orange LED battery back up mode. Mounting Method: By rubber feet on base and direct attachment to radio above.

Safe area protection: Over current - Limited by current sensing circuit. Over heat - Limited by temperature sensing circuit. Transients - Protected by filters and rugged components. Catastrophic failure - Protected by input and output fuses.

Approvals: 2014/30/EU The general EMC directive, 2014/35/EU The low voltage directive, 93/68/EEC The CE marking directive. Tested to: EN60950, EN55022, EN61204-3.