CUSTOM RC Power Supply 24v and 12v (DX8, iCharger, 406, 308, 4010, 456, 458)

  

CUSTOM 12v and 24v Power Supplies! Be the first (or second) kid on the block to have your own custom built D3dRP Power Supply! All of my these units come standard with an internal LED light, and an LED voltmeter display! They are wrapped in YOUR CHOICE of Carbon Fiber look Vinyl (current color options are Black, Blue, Red, Yellow, Orange, Green, Pink, Chameleon Purple/blue, and CHROME Carbon Fiber look GOLD, PURPLE, and SILVER). And, each unit will be paired with your choice of color blade protector (the plastic piece on the front of the power supply).

I have nearly every color of the rainbow available, so be creative! The versions I have are as follows. 12v power supplies: Single unit power supplies, only capable of 12v output. I tune each power supply to have the highest possible stable voltage (usually around 12.5v-12.8v). STANDARD 750w (63 amp) : The basic power supply, but don't let "basic" turn you away. At 750w output, this unit will handle charging two 2s batteries at 40A each simultaneously! 750w (63 amp): These units are powerful but small. About 3/4" shorter, 1/2" narrower and about a half pound lighter than the Standard 750w units. If you're concerned about weight and budget, these units fit the bill. Midsized 800w (66 amp): If you need just a little more punch from your power supply than what the 750w can deliver, these units are the ticket. They are narrow, like the compact 750w, but about 1/8 longer than the standard units. If you're using a lot of pit lights, tire warmers, etc, this might be a good option. COMPACT 800w (66 amp): Coming in at the same size as the COMPACT 750w, this is the best space saver, with a big punch you can find. This will allow you to charge two 4s batteries at 30A each Simultaneously!

You should have plenty of juice left over to power tire warmers, one of my portable soldering iron stations, and one of my motorlyzer adapters all at once! They are also capable of supplying 12v output simultaneously with 24v output.

HOWEVER Please note: The 12v output only draws power from ONE power supply, and can only provide HALF of the total wattage the power supply is rated for i. 750w on a 1500w beast. ALSO any power you use on the 12v rail reduces the total watts available on the 24v output 1. If you use 300w on the 12v side, you will only be left with 1200w on the 24v output.

Each dual unit comes standard with dual LED displays to show both 12v and 24v output voltage. The Beast - 1500w Standard unit: For those that need just a little bit more than the 1100w power supply can give - or, who absolutely need 24v capability - the Beast is a great option.

Priced affordably, This is a great way to get into a 24v unit. Sorry The Little Beast (v1) - COMPACT 1500w unit. Based on the popular COMPACT 750w units, these mighty minis weigh in at almost a FULL POUND lighter than the standard Beast. When you need 24v, but are limited on space, The Little Beast is the way to go. - Midsized and COMPACT 1600w units.

Based on the 800w compact and midsized units above, these units give you a little "breathing room" over the 1500w Beasts. The Midsized unit is narrow like the Little Beast, but just as long as the Standard units - weight is right in between the Standard and the Compact. Standard 2200w unit: For those who need to MAX OUT EVERYTHING, this is the unit for you!

Each PSU will come with a power cord, and 3D printed of course! Combine your favorite wrap color with a custom printed blade protector to match your color scheme! Three pairs of 4mm bullet connectors get the power to your chargers and other 12v accessories.

LED Readout gives you current voltage of the psu. Carbon fiber look wrap available in Black, Silver, Blue, Orange, Pink, Green, Red, Yellow, Chameleon Purple/Blue, and CHROME carbon fiber vinyl in Gold, Purple, and Silver very sleek! OTHER OPTIONS AVAILABLE: (Contact me for ordering instructions). Please contact me with your requests.