SynthRotek Five Amp Blue Power Supply Module. Power supply module - 4HP. The Five Amp is a throwback to SynthRotek's original 5A Power Supply with some upgrades.
It uses a quality 12V power brick for the +12V power regulation instead of a +12V converter. The plus side of doing it this way is that whatever amperage the -12V and +5V rails are not using can be used by the +12V rail, which always draws the most of the three. Five Amp comes in three different power configurations. It is recommend that you select an option based upon your -12V rail draw. For a rule of thumb, Red (with red LEDs) will power a single row of 84 or 104HP, Green will power two rows of 104HP, and Blue will power three to four rows of 104HP.
Multiple power options to fit your needs and budget: -- RED: Power one row of 104HP, GREEN: Power two rows of 104HP, BLUE: Power three to four rows of 104HP. Advanced low-noise, fully-regulated voltage converters on the -12V and +5V rail.Over-current protection: shuts off each power rail automatically if modules use too much current on that rail. Two 16-Pin Eurorack power connectors, keyed for safety. Molex quick-release connector for easy install of Synthrotek Noise Filtering Distribution Boards. USB jack for powering an iPhone, Beat Step Pro, etc.
Requires 12V power brick (input voltage 12V), DC Input Jack size: 2.1mm.